| R13 toothing for dry wood; medium cutting. Supplied with a 2-component plastic handle. Size: 380mm (15 inch) |
-
-
- This dual-range unit is perfect for checking moisture in carpets
- The MM1E measures moisture in two ranges (7 to 15% WME and 16"to 35% WME) on its easy-to-read bar graph with an accuracy of +/-1%
- Whether you're a professional contractor or a conscientious homeowner
- 10-LED graph display
- Two measurement ranges
- Protective cap doubles as calibration checker
- Full and low battery indications
- CE and RoHS approved
-
This Pinless Moisture Meter is your first step in mold prevention. Water and moisture buildup in a home can lead to hazardous and unsafe living conditions. By checking suspicious water stains around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried. The MMD7NP non-invasive, non-marring moister tester detects potential moisture problems without making pinholes. Its pinless design is ideal for woodworking, flooring and other applications where it is important to not damage the wood or finished surface. This water leak detector also is helpful for water damage tracing, new home inspections and home restorations where large areas need to be scanned quickly and without harming the wall or floor surfaces. It also ensures the appropriate level of surface dryness before painting, sealing or treating wood or drywall. The sturdy, ergonomic shape and rubber side grips allow for comfort even when using for multiple measurements. Every moisture meter also features a hold function to freeze a reading to read later, auto power off and a low battery indicator. A “9V” battery is included in every package. -
Rod Cutter/Bender Unique two-in-one combination of cutting and bending rebar. Jaws are made of drop forged high alloy steel with special heat treatment. Complete with NEW 80mm former for bending 12mm and 16mm reinforcing bars satisfying the minimum requirements of NZS3101. -
1000V 10 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 34mm (1.1/8 inch)Length: 259mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
10 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni + 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 29mm (1.1/8 inch)Length: 257mm Made in Spain Manufactured according to the most stringent International Standards and exceeding UNE 16532; ISO 6787; ASME B107.8; BS ISO 6787 and DIN 3117 -
Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench. Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 259mm Capacity Comparison 10 inch IREGA 92WR - 40mm STANDARD ADJUSTABLE WRENCH - 29mm Made in Spain -
1000V 12 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 39mm (1.1/2 inch)Length: 311mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
12 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni + 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 34mm (1.3/8 inch) Length: 308mm Made in Spain Manufactured according to the most stringent International Standards and exceeding UNE 16532; ISO 6787; ASME B107.8; BS ISO 6787 and DIN 3117 -
Out of stock
Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 311mm Capacity Comparison12 inch IREGA 92WR - 45mm STANDARD ADJUSTABLE WRENCH - 34mm Made in Spain -
1000V 6 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 24mm (15/16 inch)Length: 161mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
6 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni + 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 19.2mm (3/4 inch)Length: 160mm Made in Spain Manufactured according to the most stringent International Standards and exceeding UNE 16532; ISO 6787; ASME B107.8; BS ISO 6787 and DIN 3117