| 10 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni + 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 29mm (1.1/8 inch)Length: 257mm Made in Spain Manufactured according to the most stringent International Standards and exceeding UNE 16532; ISO 6787; ASME B107.8; BS ISO 6787 and DIN 3117 |
-
-
Forged steel head with fiberglass handle. Head Weight: 3lb (1360 gram)Overall Length: 11 inch -
Estwings Japanese pattern design Pro-claw nail pullers are made with fine tool steel; drop forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Both nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shape and rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places. For use in nail removal right angled for removing embedded and headless nails. Overall Length: 12.5 inch (317mm) -
Estwing's Gooseneck Bars pull; pry and straighten; with an angled chisel on one end for prying and lifting; and the other end is slotted for pulling nails. Overall Length: 914mm (36 inch) -
Specifications: Steel Type: 3CR13 Blade Length: 45mm Length Closed: 98mm Weight: 286g Included: Spring-loaded pliers with wire cutter 45mm blade Built-in LED Scissors Saw Blade Phillips (1) and Flathead (3) screwdriver tips Bottle opener Awl File blade with wire stripper Can opener 2 x CR1220 batteries included -
A unique jaw design creates more points of contact on round stock and tubing. This creates a stronger bite and more control - all with the legendary strength of a CHANNELLOCK Tongue and Groove Floor. Length: 12 inch (300mm) -
A unique jaw design creates more points of contact on round stock and tubing. This creates a stronger bite and more control - all with the legendary strength of a CHANNELLOCK Tongue and Groove Floor. Length: 12 inch (300mm) -
Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 161mm Capacity Comparison 6 inch IREGA 92WR - 27mm STANDARD ADJUSTABLE WRENCH - 19mm Made in Spain -
Super 4 plus for single; multiple and fine stranded cables of 0.2 up to 6.0mm with standard insulation used in Electrical engineering; Electrical industry and Automobile industry. Features: Ergonomic; Automatic wire stripper for wires from 0.2 - 6.0mm (AWG 24 - 10) For speedy and precise stripping of wires even where access is difficult Wire cutter for diameters of up to 2.5mm Length stopper adjustable from 6 to 15mm Plier-handle design with lockable design T&U;V / GS approved -
Estwings Japanese pattern design Pro-claw nail pullers are made with fine tool steel; drop forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Both nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shape and rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places. For use in nail removal right angled for removing embedded and headless nails. Overall Length: 15 inch (381mm) -
12 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni + 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 34mm (1.3/8 inch) Length: 308mm Made in Spain Manufactured according to the most stringent International Standards and exceeding UNE 16532; ISO 6787; ASME B107.8; BS ISO 6787 and DIN 3117 -
Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 207mm Capacity Comparison 8 inch IREGA 92WR - 34mm STANDARD ADJUSTABLE WRENCH - 24mm Made in Spain -
Not all cutting edges are the same only CHANNELLOCK uses precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. The CHANNELLOCK knife and anvil cutters ensure proper cutting edge alignment; resulting in a clean cut every time. Most manufacturers use two sharp edges which can become misaligned losing their cutting effectiveness. Experience the difference for yourself. Length: 8 inch (200mm) -
These pliers are engineered to operate in tight spaces. A crosshatched teeth pattern provides reliable grip in either direction while a narrow nose profile provides extra precision. Length: 8 inch (203mm) -
Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench. Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 259mm Capacity Comparison 10 inch IREGA 92WR - 40mm STANDARD ADJUSTABLE WRENCH - 29mm Made in Spain -
40867 – 220mm Plier- Slim handles for a comfortable grip
- Light weight to allow better balance
- Cross hacked non slip jaws
- Precision, long life cutting blades
-
1000V 6 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 24mm (15/16 inch)Length: 161mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
1000V Insulated Diagonal Cutting Pliers with non-slip cushion grip handles. Heat treated forged alloy steel with hardened cutting edges. Length: 200mm -
1000V 8 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 30mm (1.3/16 inch)Length: 207mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
1000V 10 Inch Insulated Wrench Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST according to EN-60900 Standard (equivalent IEC-900) and consisting of a 10000V charge for 10 seconds after which there should be no damage to the handle. The three Plastisol layers in different colours allow the user to easily check the condition of the insulation. In as much as the Plastisol maintains the Red colour along the entire surface - Safety is full and guaranteed When Orange colour appears at some area though Safety continues to be full and guaranteed the user must be Cautious as natural wearing has started As soon as Yellow colour appears the user should immediately Stop using the adjustable wrench as a Safety tool for electrical installations and replace it for a new one There is a fourth Black layer (without electrical insulation properties) at the bottom of the handle aimed to provide extra protection against falls knocks etc. on that area Opening: 34mm (1.1/8 inch)Length: 259mm Made in Spain The handle insulation material fulfils the requirements of IEC 900 and EN-60900 as far as it concerns the electric strength and the mechanical properties -
Stripping tool for PVC-insulated data and network cables with diameters from 4.5 to 10mm Features: Blades are titanium-nitride coated Unique blade layout lifts the outer insulation carefully and strips the foil shielding No adjustment to the cutting depth necessary Including length scale T&U;V / GS-certified -
Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the electrical sectors. For all work on or around electrical components up to 1,000 V AC. -
1000V Insulated Long Nose Cutting Pliers with non-slip cushion grip handles. Heat treated forged alloy steel with hardened cutting edges. Length: 200mm -
- This dual-range unit is perfect for checking moisture in carpets
- The MM1E measures moisture in two ranges (7 to 15% WME and 16"to 35% WME) on its easy-to-read bar graph with an accuracy of +/-1%
- Whether you're a professional contractor or a conscientious homeowner
- 10-LED graph display
- Two measurement ranges
- Protective cap doubles as calibration checker
- Full and low battery indications
- CE and RoHS approved